The LCD1000 all fired up

Alright then, so we've finally managed to put some time aside in order to re-establish access to the appropriate drivers, video outputs, and software needed to hook up the LCD1000.

Below are some initial photos (excuse the dust!), and a video with some commentary will be made shortly. In fact, if you haven't already seen it, we put up a video a while back which demonstrated how it operated using the 'bezel only' version of this panel, which can be found here.

There are a couple of minor issues for us to tidy up here and there, as this unit was essentially our first prototype, but to give you an idea of costings, these units will be sold for US$570-00. If you're interested (or have any questions), please feel free to contact us directly, as our products are typically available for purchase well before we get the time to actually advertise them properly on our website.

Evolution of the Ruscool LCD1000 Unit

For the past few months we've been selling a bezel complete with buttons and encoders (see the first two photographs), which is based around the Aspen EFD1000. It was designed to fit in front of an LCD monitor upon which the appropriate graphics were shown, with our PCB interfaced to its software, thus making the unit operational.

Below is a short video on our Youtube account demonstrating its functionality using the Flight1 Aspen software. It it also able to use the Aspen EFD1000 software from Friendly Panels.

This product has recently undergone something of a facelift, however, and has since been significantly upgraded and taken to a much more realistic level, having now evolved into the Ruscool LCD1000; a stand-alone unit complete with its own LCD screen.

As seen from the shot above, with the ability to now fit the unit actually into a panel as would properly occur in an aircraft, the thickness of the panel is much reduced. Similarly, with the LCD display unit now embedded deep into the panel itself, there is a substantially more realistic and aesthetically pleasing result with regards to the distance from the panel's surface to the graphics.

 

Jumping out at everybody - I'm sure - is the fact that the display isn't actually displaying anything! Rest assured that this is simply a logistical issue at present, due to some temporary relocations of computers and monitors about our workshop, and shall be remedied as soon as possible so that we can update matters with a proper video and some more details. It still uses the Flight 1 Aspen software, or the Friendly Panels Aspen software.

In the meantime, and going right back to the earliest origins of this product, below are some shots from a few months back that some might consider interesting: our first operational prototype of the 'bezel only' version ...

Operational Autopilot System - RMC710

This is an early preview of one of the many new items that we've been developing in the background over the past few months: an operational Autopilot System (the Ruscool RMC710), which is based around the Garmin Mode Controller (GMC 710) ...

The text on the faceplate is backlit, and all the buttons are able to be illuminated when their particular function is selected. The rotary encoders have pushbuttons like the real unit, and the roller wheel for the Vertical Speed adjustment has notches to allow for ease of turning,

 

The unit has been designed to fit into a separate backing plate which is then attached to the main instrument panel. This is currently being painted however, and we haven't got any decent photos of this yet (it was made yesterday), but we shall remedy this once the entire unit has been installed and is up and running in our customer's simulator. He lives locally too - which is mighty convenient!

 

 

Despite this system being designed around our own I/O boards, as with the majority of our products, wherever possible we also make each individual connection available directly from the PCB (see above photograph) so that our customers can use whichever interface system they wish. One reason to employ our own I/O boards is of course that all of the software and its capabilities are known to us, although an additional benefit is that we also have the ability to customise some of the logic as and when necessary.

And this is how it looked prior to the fitting of the buttonheads and knobs, the application of paint, and the completed engraving. You can just make out the backlit buttons through the open buttonholes.

Oops, what do you know ... the painting of the backing plate was finished and dried before we'd completed this post, so below is a quick photo of the assembled faceplate fitted into this particular version of backing plate.

As with all initial concept items, there are several slight alterations with regards to a few details here and there - such as replacing the mounting screws some more realistic countersunk types, and the concealment of the encoder nuts - which will be implemented on subsequent versions.

A customised 737 Panel ...

We don't offer a lot of 737 products as there are already plenty of quality manufacturers in this market and there's not really much else that we could normally offer over and above what's already available. Recently, however, we've been working with a customer who has specific space limitations and therefore custom measurements are required to properly house the panels in their rightful places.

After much testing and verification in our workshop to prove the possibilities, the panel will be used by our customer with his PMDG 737-800 NGX software via one of our 64 Input Boards for the switches, and a Conditional 64 Output Board to drive the LEDs in the annunciators.

And so this is the Boeing 737 N1 SET / SPD REF / AUTO BRAKE Panel that we dispatched to him a couple of weeks back, complete with our newly developed backlighting process. We haven't implemented this backlighting technique across our entire product range at the moment, as due to time restraints - and getting work out to customers - its become more of a panel by panel expansion (I guess that would be the best way to describe it!) ...

Alongside the panel itself, we also made the functioning combination switches  which include a rotary switch, and an encoder (with pushbutton also if required). As you can tell from the positioning of the text, we've actually used some 30 degree rotaries as the 45 degree switches we had access to weren't able to be readily altered for the purposes required.

As a one-off type of project, a small section of vero board has been used to mount the small MFD switches, which isn't perhaps very pretty but gets the job done all the same! The photo below shows the panel about 80% wired.

A notable couple of omissions on this panel are obviously the two annunciators that accompany it, because we had already built these previously for our customer, so we simply built the rest of the panel around these measurements and the overall dimension constraints for the panel that were originally provided to us. The dual concentric knobs are designed and manufactured by us as well.

We've also improved our engraving technique lately as well, which is hopefully demonstrated by the picture above. It takes a little longer to accomplish, but the results are certainly worth it ...

Some newly completed radios

As always there's too much work to be done to keep up with all that we'd like to post about, although we did manage to take a quick video of some newly completed radios the other day ...

[Although the blog feels like it's been in something of a holding pattern for a while now, we have ambitious plans of uploading much more of what we've been doing for the past few months, as we've been kept on our toes with a variety of interesting projects ... ]

Bell 206 Avionics Stack

A quick post on a frantic Friday afternoon linking to a video of a Bell 206 Avionics Stack that we made for a customer recently. A more in-depth post about this project will be written up shortly, but in the meantime, a couple of photos and the video ... 

Customised Vertical Speed Unit

Always good for keeping us on our toes, we were recently asked by a customer in South Africa to build a customised Vertical Speed Unit based around a truncated version of the Operational Altitude Alert System that we already make, and which was ordered at the same time.

Some new code had to be written especially for the Vertical Speed processor chip of course, which had to allow for both positive and negative values etc, and after much testing and fine-tuning this is all now working as expected. We should have taken a video(!) but instead a few photographs will have to suffice as evidence.

As something as an aside here, our Altitude Alert software has also recently been updated so as to allow for altitude settings below 1000ft; functionality that's often a requirement for helicopter simulators. 

The Main BK-117 Caution Panel

As the final post dealing with the various parts we've been designing for a BK-117 helicopter simulator, this component is by far the largest single piece although was relatively painless to manufacture (panel-wise) due its being based around our standard 30x10 annunciators. Aside from making the appropriate surround to fit our client's dimensions, it was really just a matter of customising the legends as necessary.

There are terminals for a 'Lamp Test' button to be connected, and in 
the photo above you can see that it has been connected and pressed! 

[Here's a shot of the original layout our panel was based on. 

The legends differ in places due to each Caution Panel 

reflecting a slightly different configuration.]

Cold and dead.

The LED boards that are shown fitted to the rear of the panel are actually truncated versions of those that are typically used in our King Air MIP Annunciator Panels. The matrix for those units are 6 x 6 whereas here we needed to use a 5 x 5 matrix. Designing the PCB layout (so that the PCBs can be readily used for either variation) was an interesting process and the most time-consuming for this particular piece of hardware.

The cables and PCBs will eventually be interfaced via our Conditional 64 Outputs Board, which uses RJ45 connections. Note, however, that headers are also fitted so that it can be interfaced in another way if desired.

BK-117 AP Select Panel

Another part for the BK-117 project, this time the AutoPilot Select Panel.

The same buttons were incorporated here as on the AP Actuator Panel 

discussed in an earlier post, although the LEDs were yellow in this instance. 

This part was again designed to be fitted as a single piece after all of the 

necessary wiring had been done as all of the backing pieces are attached 

to the front panel. It is, of course, able to be fully dismantled 

- although hopefully there'll never be any need to!

This particular unit will be interfaced via FSUIPC and one of our 

PCBs but as it's all just LEDs and switches, it can be readily 

interfaced however one wishes.

A lower shot to highlight the various depths of the button-heads 

and finger guards, and the relative sturdiness of the entire assembly.

[The original image that we were asked to work off.]

And here's our very earliest prototype. Most of our prototypes 

are made in clear acrylic as doing so allows us to better view 

and calculate all of the rebates and pocketing from all angles 

without having to constantly flip the pieces back and forth 

in order to understand what's going on. 

Small BK-117 AP Panel

Continuing with the BK-117 ...

The sizings for this panel meant that we were actually able to use 

our standard replica Korry buttons and surrounds without any 

modifications, which might seem like a small, not particularly noteworthy 

coincidence, although things like that can greatly reduce the design time.

After a multitude of tests using a variety of different light-blocking 

techniques, our attempts to stop excessive light bleed into the surrounding 

material (and therefore the neighbouring legend!) was finally accomplished 

via a combination of cleared material (creating an air gap) and paint.

Testing the brightness of the LED glow beneath the full glare of our 

workbench's fluorescent lights. Most simulators are in partial darkness 

of course, but it's always nice to try and have the lighting noticeable 

in daylight, which might be the normal circumstances of an aircraft's flight.

[The original image our panel was designed around]

BK-117 Actuator Panel

As one component of a much larger job, we recently designed the 
panel shown below for a local company's BK-117 simulator. 

[This is an image of the original panel which we were asked to replicate.]

It was designed as a complete unit that could be neatly fitted into 

place once the appropriate wires had been fitted. Each button 

has been fitted with two 3mm LEDs and a switch, which will eventually 

be wired up and interfaced via one of our PCBs and FSUIPC.

The LED recesses behind each buttonhead can be clearly seen in this 

earlier prototype, of which several were made before we had a workable 

solution that accounted for all of the various depths involved regarding 

switches, guards, buttonheads, clearances etc ... !