Pages

Monday, March 07, 2022

Fusion Pedestal for King Air B350

As we've been documenting in the past few posts, here's the finished and fully-assembled pedestal panel that we recently completed for a King Air B350 simulator.




And a quick shot of the pedestal prior to painting and engraving etc.

Sunday, February 20, 2022

Fusion-style MKP for the B350 Pedestal

The multifunction keyboard panel (MKP) is the third and final component that we manufactured for the B350 Pedestal Plate we completed recently. As mentioned in earlier posts, this module was based on the Pro Line Fusion range of hardware.


The Pan/Zoom knob is a four-direction hat switch, which also has encoder and pushbutton functions as well.

 A box header allows the unit to be connected to a controller via a 40-way ribbon cable.

There's no actual backlighting on the panel itself, but all of the buttonheads are illuminated.

Friday, February 11, 2022

Fusion-style CCP Panels for the B350

And so this is the second panel that we've designed for the King Air B350 pedestal unit that's based on the Pro Line Fusion range of hardware.

There's a pair of these to be found on the pedestal plate: one either side of the MKP (which we've also just completed, and which will be posted here shortly) ...

 

The large TAB knobs are all CNC-machined from acrylic, which gives them a nice solid feel.

The TAB knob operates a four-directional hat switch, that's also a single encoder, and which has a pushbutton action too. Unfortunately we weren't able to replicate the exact functionality of the real unit, as this actually calls for a dual encoder/hat switch combination - and with eight directions as well!

We tried our best to find a solution - one involving all sorts of internal gears that required the mounting of an additional hidden encoder - but in the end we were unfortunately forced to realise our limitations. Our solution actually got pretty close to working, but was nowhere near reliable enough to run with. Instead, the two separate TAB knobs are effectively one, as they're both mounted to the hat switch, albiet individually.

In the above image, you can see some remnants of our attempt at producing a makeshift dual-encoder hat switch, as this originally required a second hardware PCB (not shown) that would be positioned on a set of stand-offs which would then be mounted on the rear of the circuit board that you see here. So there's a lot of superfluous circuitry on display - not all of which can be explained by what's seen from the front!

The panel's backlighting, and that of the buttonheads, runs on 12V.


Tuesday, February 01, 2022

Fusion-style Tilt and Baro Panels for the B350

These are the first couple of simulation panels that we've been working on for a B350 pedestal unit that's based around the use of Pro Line Fusion hardware.

 
 
 
 
These fully-backlit panels run on 12V.
 
 
 
 
In the above image, you can see the sub-mounting plate that the individual Tilt and Baro panels are fitted to. This mounting plate is then fitted to a larger pedestal plate, which will be shown in subsequent posts.
 
 

Thursday, December 16, 2021

B350 Cockpit Voice Recorder (CVR) Panel

Below are some images of our King Air B350 Cockpit Voice Recorder (CVR) Panel, which has recently been added to our product range.




The backlighting is run on 12V.


And this is what the panel looks like from the rear ...

Friday, December 03, 2021

B350 Audio Panels

Below are some photos of the B350 Audio Panels that we manufactured for a customer's simulator recently. 

First, the Captain's side ...

 

And then the First Officer's side, which is basically a mirrored version of the Captain's side ...


Sunday, September 26, 2021

B350 Reversionary Panels

Below are some photos of two separate B350 Reversionary Panels that we've made recently.

The first panel shown here is based on the Pro Line Fusion Reversionary Panel.


In the above photos, you'll notice that the are no Korry switches fitted. This is because our customer will be using real Korry 389 switches in their simulator, which will be fitted at a later date. 

During the design process, however, they were kind enough to send several Korry 389's to us, so that we could verify the correct fit. Below are the results ...





Both of these reversionary panel variations have also been designed so that we can mount our own replica Korry switches if needed, and it's these which are shown in the photographs of the B350 Standard Reversionary Panel below ...

The large white panel that's shown in the above images is simply a mounting plate designed to keep the panels safe during transit, as they're surprisingly long (550mm) but only 40mm high, which leaves them a little fragile when it comes to shipping.

Friday, September 03, 2021

TBM-900 Panels

We now have a range of TBM-900 panels available through our updated website ...

TBM-900 De-Icing Panel

At the moment, the LEDs are separate to the fitted LED circuit board, although we'll be updating this shortly so that all of the connections are contained on the PCB itself. This will just tidy things up a little.

The toggle switches used on this panel have a longer than normal actuator, which allowed us to better replicate the switch holes seen on the real panels.




TBM-900 Landing Gear Panel

We've previously written a short blog post about this panel here ...




TBM-900 ECS Panel

We fit one of our own replica Korry switches to these panels, but the hole is also the correct size for a Korry 389 series switch.

 

 

TBM-900 Overhead Panel

This panel is by far the largest panel that we've ever made and we actually had to have the body of it manufactured off-site. And shipping them to our customers also requires some aluminum bracing in order to keep it well-protected in transit!